Epson EPL-6200, Service Manual

Page: 14 / 204

EPSON EPL-6200/EPL-6200L Revision A
Product Description Outline 14
CONTROLLER FEATURES
<EPL-6200>
†
High-speed controller
„
CPU : TMPR4955BFG 200 MHz (Same as for EPL-N2500)
„
RAM : 8 MB fitted as standard RAM and Expandable up to 136 MB
Max.
Exclusive RAM DIMM for EPSON (Same as for EPL-6100)
†
Equipped with one Type B interface slot (Level 3 supported)
†
Two standard interfaces
„
IEEE1284 parallel interface
„
USB interface
†
Real 1200dpi supported
(Only in ESC/Page, PCL6, PostScript 3. Up to 600 dpi supported in other modes)
NOTE: 1200 dpi printing needs much memory. At 1200 dpi printing,
therefore, the possibility of running short of memory is high with
standard memory.
Recommendation: Extension of 16 MB or more.
†
EnhancedMicroGray installed (available only in 600 dpi and 300 dpi.
Automatically switched off when 1200 dpi is selected.)
†
RITech installed (available only in 600 dpi and 300 dpi. Automatically switched
off when 1200 dpi is selected.)
†
PCL6 emulation is installed as a standard feature.
†
Adobe PostScript3 is installed as a standard feature.
†
No optional ROM DIMM slot.
<EPL-6200L>
†
Host-based controller
„
CPU : EPSON 32 bit RISC S1C33000 48 MHz
„
RAM : Standard RAM is 2 MB
RAM can be not expanded.
†
Two standard interfaces
„
IEEE1284 compatible parallel interface supporting ECP.
„
USB interface (USB revision 1.1, supporting USB ID).
†
Data compression technology
„
Sending compressed data from a host computer allows printing most of the
data with only standard memory.
„
An expanded circuit hardware provides high-speed processing.
†
No toner save mode
†
No 300 dpi mode
†
No RITech or PGI (EnhancedMicroGray)