Setting the Date and Time
The real-time clock in your computer continuously tracks the
date and time-even when the computer is turned off. Once
you set the date and time using SETUP, you should not need to
change them, unless you need to adjust the time for daylight
savings or other seasonal adjustments. (The computer
automatically changes the date for leap years.)
Use the cursor arrow keys to position the cursor over the
portion of the date or time you want to change. Press or
to modify the date or time. The time parameter uses a
24-hour clock. For example, 5 p.m. is shown as 17.
Setting the Diskette Drive(s)
Your system probably came with one diskette drive installed.
You may also have another drive of a different size or capacity.
The SETUP menu offers five possible selections for your
diskette drives (A and B):
q
360KB, 5.25-inch
q
1.2MB, 5.25-inch
q
720KB, 3.5-inch
q
1.44MB, 3.5-inch
q
Not Installed.
Check the settings for both drives and correct them if necessary.
(If you have only one diskette drive or if you install a tape drive
in the lower drive bay, select
Not Installed
for drive B.)
If you install a combination (dual) diskette drive, the top drive
is A and the bottom drive is B.
Running the SETUP Program
2-5
