List of Functions
36
Standby Mode
You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
Depending on the model, you can use the following methods to monitor and control the state of the projector.
EMP-6110
: You can use SNMP
g
or EMP Monitor software supplied with this product.
EMP-6010
: You can download the EMP Monitor software
*1
from the your local Epson homepage.
Air Filter Setting
You can set information regarding the replacement time/cleaning time for the air filter.
Alarm Timer
: You can set whether you are informed (On) or not (Off) when it is time to replace the air filter.
Make sure you set this to "On" if you are using the smoke type air filter.
Timer
: You can set whether or not to display a message indicating length of use.
The projector automatically detects the type of air filter installed and sets the appropriate time for filter replacement. However, you can set the
message to warn you earlier depending on the projector's environment to give you more notice that maintenance will soon be required.
Clean Notice
: When this is set to "On", a message is displayed when the air filter is clogged with dust or dirt.
Clean Notice Timing
: When the Clean Notice is set to "On," you can select one of five timings at which the notification is displayed. When the
projector is being used in a particularly dusty environment, make this setting such that the message is displayed relatively quickly.
Projector ID
Each projector must be assigned an ID if operation with the remote control is to be restricted to a given projector. "Off" indicates that no ID is set.
Multi-screen
You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting.
Adjustment Level
: You can adjust from black to white in five stages called levels 1 to 5, and in each level 1 to 5 you can adjust "Brightness
Correct." and "Color Correct.".
Brightness Correct.
: Corrects the difference in the brightness of each product.
Color Correct. (G/R) / Color Correct. (B/Y)
: Corrects the difference in the color of each product.
Language
You can set the language for message displays.
Reset
You can reset "Display
*2
", "Operation
*3
", and "Air Filter Setting" in the "Extended" menu to their default settings.
To return all menu items to their default settings, see
*1 To download EMP Monitor software, go to
, select your local Epson Web site and then select the support section. EMP Monitor is software
that uses a computer to monitor and control the state of one or more projectors on a network.
You will need a serial
W
IP conversion adapter and cable to connect an EMP-6010 to a network so that you can monitor it with EMP Monitor. You can check
product information and operation compatibility at the homepage address mentioned above.
*2 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
*3 Except for "High Altitude Mode".
Sub Menu
Function
Summary of Contents for EMP 6110
Page 1: ...1 User s Guide ...
