Epson EMP 6110, User Manual

Page: 22 / 84

22
Color adjustment when using multiple projectors (Multi-Screen Color Adjustment)
When several projectors are lined up and projecting images, you can
adjust the brightness and color tone of each projector's image with
multi-screen color adjustment so that the colors of images from each
projector match closely.
In some cases the brightness and color tone may not match
completely even after adjustment.
Summary of Adjustment Procedure
Make adjustments according to the following procedure.
1. Restricting the projectors that can be operated with the remote
control.
Regardless of how many projectors you are using together, you can
make the settings such that only the projector that needs the correction
will respond to the remote control.
s
p.20
2. Making image corrections
Perform image correction for each of the projectors.
Using image correction you can adjust from black to white in five
stages called levels 1 to 5, and in each level 1 to 5 you can adjust the
following two points.
• Adjusting brightness
Adjust each image by levels 1 to 5 so that they are all equal.
• Adjusting color
Adjust each image by levels 1 to 5 so that the colors match using
"Color Correct. (G/R)" and "Color Correct. (B/Y)".
Attention
When the projector is to be used together with several others, such
as when they are lined up on a desktop, make the following
configuration settings. If the projectors are not configured
correctly, there is a danger that hot exhaust air from one projector
will trigger a High Temp Warning in that positioned next to it.
• Project an image that is at least 50 inches in size.
• Ensure that the ambient temperature is no more than 35
° C.
• Position the projectors no less than 55 cm apart.
• Do not place the projectors in a high-temperature location, such
as in direct sunlight, or near the vents of a heater or air-
conditioner.