Epson EMP-1815 User Manual Download

Page: 92 / 111

Inserting and Ejecting CompactFlash Cards (EMP-1825 Only)

On the EMP-1825, CompactFlash cards can be used as external
memory storage.
The following explains how to insert and eject CompactFlash cards.

How to Insert Cards

Insert the CompactFlash card into the card slot with its top
surface facing up.

Firmly insert the card as far as it can go.

How to Remove Cards

Press the eject button at the side of the card slot.

The eject button springs out.

Attention

• Insert CompactFlash card so that it faces the correct direction.

Inserting a card in the wrong direction may result in malfunction
or damage.

• When carrying the projector, be sure to remove the CompactFlash

card.

Procedure

CompactFlash card

(commercially available)

Attention

When the access indicator of the card slot is lit green or is flashing,
do not remove the CompactFlash card. Doing so will damage data
stored on the card or cause the projector to malfunction.

Procedure

Card slot access

indicator

Eject button

Summary of Contents for EMP-1815
















































































































Search results

Summary of Contents for EMP-1815

Reviews:

Related manuals for EMP-1815

Brands by name

Popular brands

Epson EMP-1815, User Manual

Search results

Summary of Contents for EMP-1815

Reviews:

Related manuals for EMP-1815

Brands by name

Popular brands