Epson EMP-1815, User Manual

Page: 35 / 111

Adjusting Color for Several Projectors (Multi-Screen Color Adjustment)
35
Image Correction Method
After setting up the projectors, adjust the brightness and tone for each
image.
A
Press the [Menu] button and select "Extended" -
"Multi-screen" from the configuration menu.
s
"Using the Configuration Menu" p.42
B
Select the level to be adjusted in "Adjustment
Level".
• Each time a level is selected, the pattern of the level selected is
displayed.
• You can start adjusting from any level, usually you can make it
darker or lighter by adjusting 1 to 5 or 5 to 1.
C
Adjust the brightness with "Brightness Correct.".
• When you select level 5, it adjusts to the darkest image from
several projectors.
• When you select level 1, it adjusts to the brightest image from
several projectors.
• When you select level 2 to 4, it adjusts to the mid-range
brightness image from several projectors.
• Each time the [Enter] button is pressed the image displayed
changes between the pattern display and the actual image, and
you can check the adjustment results and make corrections in the
actual image.
D
Adjusting "Color Correct. (G/R)" and "Color Correct.
(B/Y)".
Each time the [Enter] button is pressed the image displayed
changes between the pattern display and the actual image, and you
can check the adjustment results and make corrections in the actual
image.
E
Repeat procedures 2 to 4 until adjustments are
finished.
F
When all adjustments are finished, press the [Menu]
button to close the configuration menu.
Procedure