Troubleshooting
86
Check
Remedy
Was a new device connected, or was the con-
nection changed?
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Are many multi-media players connected?
Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
The device name is not displayed under Device Connections
Check
Remedy
Does the connected device meet the HDMI
CEC standards?
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
Problems with WirelessHD (EH-TW6100W only)
Cannot project WirelessHD images
Check
Remedy
Does the cable connecting the supplied Wire-
lessHD Transmitter meet the HDMI stand-
ards?
If the cable does not meet the HDMI standards, operations are
not possible.
Is
WirelessHD
set to
Off
?
When
WirelessHD
is set to
Off
from the configuration menu,
projection is not possible for WirelessHD input signals. Set
Wire-
lessHD
to
On
, and then press the
button.
s
Settings
-
WirelessHD
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s
Is the supplied WirelessHD Transmitter
turned on?
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
No AV device is connected. Check that the HDMI cable is securely
connected.
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Are the projector and the WirelessHD Trans-
mitter facing the correct way?
Setup the projector and the WirelessHD Transmitter so that they
are facing each other.
WirelessHD audio is not output correctly
Check
Remedy
Is audio output when the WirelessHD is con-
nected?
Set the connected equipment to PCM output.
Summary of Contents for EH-TW5910
Page 1: ...User s Guide ...
Page 25: ...Basic Operations 24 f Reattach the lens cover ...
