Epson EH-TW5910 User Manual Download

Page: 94 / 107

Maintenance

Tighten the lamp fixing screw.

Install the lamp cover.

Slide the cover back into place.

Tighten the lamp cover fixing screw.

Warning

Do not disassemble or remodel the lamp.

Caution

•

Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does
not turn on.

•

The lamp contains mercury. Dispose of used lamps in accordance with your local laws and regulations on
disposing of fluorescent tubing.

Resetting lamp hours

After replacing the lamp, make sure you reset the lamp hours.

The projector records how long the lamp is turned on and a message and indicator notify you when it is time
to replace the lamp.

Turn on the power.

Press the

button.

The configuration menu is displayed.

Summary of Contents for EH-TW5910












































































































Search results

Summary of Contents for EH-TW5910

Reviews:

Related manuals for EH-TW5910

Brands by name

Popular brands

Epson EH-TW5910, User Manual

Search results

Summary of Contents for EH-TW5910

Reviews:

Related manuals for EH-TW5910

Brands by name

Popular brands