Epson EH-TW5910 User Manual Download

Page: 64 / 107

Useful Functions

Playing Back Image Data (Slideshow)

Compatible Data

The following types of files stored on USB storage devices such as USB memories, digital cameras, and so on
that are connected to the projector's USB port can be displayed as a slideshow.

Slideshow compatible file types

File Type (Extension)

Notes

.jpg

•

Images using CMYK color mode are not compatible.

•

Progressive format images are not compatible.

•

Images with a resolution greater than 8192 x 8192 are not compatible.

•

Due to the characteristics of JPEG files, images may not be projected clearly if the
compression ratio is too high.

Playing a Slideshow

Connect a USB storage device.

Files are displayed as thumbnails.

To open a folder, select the folder, and then press the

button.

If multiple drives are displayed, select the drive you want, and then press the

button.

If thumbnails of the files are not displayed, press the

button on the remote control to

change the source.

Select

Slideshow

Use the

buttons to select

Slideshow

at the bottom right of the screen, and then

press the

button.

Slideshow starts.

•

To close the Slideshow, disconnect the USB storage device.

•

Select an image from the thumbnails and press the

button to enlarge the selected image.

Press the

buttons on the remote control when viewing an enlarged image to change between

images. You can also rotate the image using the

buttons.

Summary of Contents for EH-TW5910












































































































Search results

Summary of Contents for EH-TW5910

Reviews:

Related manuals for EH-TW5910

Brands by name

Popular brands

Epson EH-TW5910, User Manual

Search results

Summary of Contents for EH-TW5910

Reviews:

Related manuals for EH-TW5910

Brands by name

Popular brands