Epson EH-TW5910, User Manual

Page: 55 / 107

Useful Functions
54
WirelessHD Transmission Range
The following shows the communication transmission range for the WirelessHD. Make sure you set up the
WirelessHD Transmitter so that it faces the projector.
Horizontal direction
Vertical direction (placed on a table and so on) Vertical direction (suspended from a ceiling)
c
•
The wireless transmission range varies depending on the placement and material of the surrounding
furniture and walls. The values given here are for your reference only.
•
The projector cannot communicate through walls.
•
Place the WirelessHD Transmitter on a wooden shelf or other location that does not block the signal
from being transmitted from the front of the device. Note that placing the transmitter on a metal shelf
may cause signal instability.
•
The antennas are built-into the front of the projector and the WirelessHD Transmitter. Make sure the
antennas face each other (face the front) when setting up the devices.
•
Place the projector and the WirelessHD Transmitter close to each other, and make sure there are no
other projectors operating in the vicinity.
•
Depending on the reception strength, the image's color information may be automatically discarded
to avoid any interruptions and maintain a constant connection. To avoid any deterioration in image
quality, adjust the position of the WirelessHD Transmitter so that the
Reception is as strong as possible.