86
Power light
Status light
Laser light Temp light
Status and solution
Blue
Flashing blue
Off
Off
Warming up. Wait for about 30
seconds for an image to appear. All
buttons are disabled.
Cooling down or shutting down. All
buttons are disabled.
Flashing blue
Off
Off
Off
The projector is preparing to enter
USB Power in Standby mode
Off
Flashing blue
Flashing
orange
Off
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Off
Flashing blue
Off
Flashing
orange
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Off
Flashing blue
Off
Orange
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on
High Altitude
Mode
.
• If the problem persists, unplug the
projector and contact Epson for
help.
Summary of Contents for EF-100 Series
