Epson EF-100 Series User Manual Download

Page: 37 / 126

The next time you turn on the projector, the last connected device is automatically connected. To change
the connected device, repeat these steps.

Parent topic:

Projector Connections

Installing Batteries in the Remote Control

The remote control uses the two AAA batteries that came with the projector.

Caution:

Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

Remove the battery cover.

Insert the batteries with the

and

–

ends facing as shown.

Warning:

Make sure the batteries are inserted in the correct positions. If the batteries are not

inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.

Summary of Contents for EF-100 Series































































































































Search results

Summary of Contents for EF-100 Series

Reviews:

Related manuals for EF-100 Series

Brands by name

Popular brands

Epson EF-100 Series, User Manual

Search results

Summary of Contents for EF-100 Series

Reviews:

Related manuals for EF-100 Series

Brands by name

Popular brands