Using Basic Projector Features
58
the image's aspect ratio. However, you can change the aspect ratio for certain
images to fit your screen.
Execution Method
• Press the [Aspect] button on the remote control.
• Change the projector's menu:
s
Signal
>
Aspect
a
If you always want to use a particular aspect ratio for a certain video
input source, you can select it using the projector's
Signal
menu.
Screen Type
You can use the
Screen Type
setting to match the aspect ratio of the displayed
image to the screen you are using.
Execution Method
s
Extended
>
Display
>
Screen
>
Screen Type
a
• Adjust the aspect ratio for the projected image, if necessary.
• When the
Screen Type
setting changes, the
EDID
settings are
automatically adjusted.
Projection
You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
Execution Method
s
Extended
>
Projection
a
You can change the projection mode to flip the image over top-to-
bottom by holding down the [A/V Mute] button on the remote control
for approximately 5 seconds.
Test Pattern
You can display a test pattern to adjust the projected image without
connecting a computer or video device.
Execution Method
• Press the [Test Pattern] button on the control panel or remote control.
• Change the projector's menu:
s
Settings
>
Test Pattern
