Solving Network Problems
174
Solutions When the Image Contains Static During
Network Projection
If the projected image contains static during network projection, try the
following solutions:
• Check for any obstacles between the access point, the computer, the mobile
device, and the projector, and change their positions to improve
communication.
• Make sure that the access point, the computer, the mobile device and the
projector are not too far apart. Move them closer together and try to
connect again.
• Check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your
wireless bandwidth.
• Reduce the number of connected devices if the connection speed declines.
Solutions When You Cannot Monitor and Control the
Projector over a Network
If you are unable to monitor and control the projector with command
communication using ESC/VP.net, set the
Command Communication
setting to
Compatible
.
s
Network
>
Network Configuration
>
Others
>
Command
Communication