Epson EB-1935, User Manual

Page: 66 / 157

a
•
When User's Logo Protect from Password Protect is set to
On , a message is displayed and the User's Logo cannot be
changed. You can make changes after setting User's Logo
Protect to Off .
s
"Managing Users (Password Protect)" p.67
•
If User's Logo is selected when Keystone, E-Zoom, Aspect, or
Adjust Zoom are being performed, the function currently
being performed is temporarily cancelled.
c
When the message "Choose this image as the User's Logo?" is
displayed, select
Yes .
a
When you press the [ ] button on the remote control or the
control panel, the screen size may change depending on the
signal to match the actual resolution of the image signal.
d
Move the box to select the part of the image to use as the User's
Logo.
You can perform the same operations from the projector's control
panel.
Remote control
a
You can save at 400x300 dots in size.
e
When you press the [ ] button and the message "Select this
image?" is displayed, select Yes .
f
Select the zoom factor from the zoom setting screen.
g
When the message "Save this image as the User's Logo?" is
displayed, select
Yes .
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a
•
When a User's Logo is saved, the previous User's Logo is
erased.
•
It takes a while to save. Do not operate the projector or any
connected equipment while it is saving, otherwise
malfunctions may occur.
Projection Functions
66