Epson EB-1935 User Manual Download Page 113

Page: 113 / 157

If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.

See the following if the indicators do not show clearly what the problem might be.

"When the Indicators Provide No Help"

p.116

Reading the Indicators

The projector is provided with the following three indicators that indicate the operating status of the projector.

Power indicator

Indicates the operating status.

Standby condition
When the [

] button is pressed in this condition, projection starts.

Preparing for network monitoring or cool down in progress
All buttons are disabled while the indicator is flashing.

Warming  up
Warm-up  time  is  about  30  seconds.  After  warm-up  is  complete,  the  indicator  stops  flashing.
The  [

] button is disabled during warm-up.

Projecting

Lamp indicator

Indicates the projection lamp status.

Temp indicator

Indicates the internal temperature status.

Problem Solving

113

Summary of Contents for EB-1935






























































































































































Search results

Summary of Contents for EB-1935

Reviews:

Related manuals for EB-1935

Brands by name

Popular brands

Epson EB-1935, User Manual

Search results

Summary of Contents for EB-1935

Reviews:

Related manuals for EB-1935

Brands by name

Popular brands