2-12
2-12
|
Monitoring the Printer
Paper Set
<paper source>
<paper size>
The paper in the specified paper
source doesn’t match the paper
size setting. (Hardware and
software settings don’t match.)
Make sure the paper is the size you want,
then press the
Continue
button to print.
You can disable size checking through the
printer’s control panel.
Print Overrun
The required time to process the
print data exceeds the print
engine speed because the
current page is too complex.
Press the
Continue
button to print. If this
message appears again, turn on
Page
Protect
in the SelecType Config Menu.
If you see the same message when you
try printing the same page again, you may
need to reduce the number or size of
graphics or fonts, lower the resolution, or
add memory to your printer.
<CMYK> Toner
Low
The specified toner cartridge is
almost empty.
Press the
Continue
button to print.
Replace the toner cartridge as soon as
possible.
Warning
Photocondctr
The photoconductor unit is
nearing the end of its life.
Press the
Continue
button to print.
Replace the photoconductor unit as soon
as possible.
Waste T Box
Nearfull
The waste toner collector is
almost full.
Press the
Continue
button to print.
Replace the waste toner collector as
soon as possible.
Warning messages (continued)
Message
Explanation
Response
See
Summary of Contents for ColorPage 8000
