manualshive.com logo in svg

Epson C31CD54011, Developer'S Manual, Page: 84 / 101

Share
Download
Epson C31CD54011 Developer'S Manual Download Page 84

84

Roll Paper

Compatible paper formats are as follows.

•

Continuous paper (black marks)

•

Die-cut labels (black marks)

•

Die-cut labels (gaps)

•

Die-cut labels with transparent backing paper

Paper Handling Method

•

Continuous paper (black marks)
Set the leading edge of the first black mark so that it is located at 172.5 to 200 mm from the 
leading edge of the paper.
Do not set the black mark so that it is located at less than 172.5 mm from the leading edge of the 
paper.

•

Die-cut labels (black marks and gaps) and die-cut labels (gaps) with transparent backing paper
Set the leading edge of the first label so that it is located at 172.5 to 200 mm from the leading 
edge of the paper.
Do not set the label or black mark so that it is located at less than 172.5 mm from the leading 
edge of the paper. This area must only consist of backing paper.

 

Black mark width leading edge

172.5 to 200 mm

Paper feed direction

 

Black mark width leading edge

172.5 to 200 mm

Paper feed direction

Summary of Contents for C31CD54011






































































































Reviews:

No comments