o
If you use continuous paper whose page length (A in the
illustration) is under 101.6 mm (4 inches), make sure that the
length between folds (B) is over 101.6 mm (4 inches).
For continuous multi-part forms:
o
The form sheets of continuous multi-part forms should be
securely joined together along the left and right edges by
crimping or spot-gluing. For the best printing quality, use
multi-part forms joined with spot-gluing.
o
Never use continuous multi-part forms that are joined with
metal staples or bar-gluing.
o
The thickness of the folding part when extended should be the
same as or less than the total thickness.
A
B
me-033
spot-gluing
1 inch
or less
printing side
crimping
3 inches
or less
1 inch
or less
3 inches
or less
spot-gluing
and crimping
on each side
metal stapling
bar-gluing
Same as total thickness
or less
printing side
Me-83
A
R
Peony
Rev.C
A5 size
Appendix A
98/01/07
pass 4
Specifications
A-5
Summary of Contents for C204001 - DFX 8500 B/W Dot-matrix Printer
