The following illustration shows a way to position your paper
with the rear tractor loaded.
Installing the perforation cutter
The steps below show you how to install the perforation cutter.
You will need a cross-head screwdriver.
Note:
If you plan to use the perforation cutter with the built-in rear tractor,
you need to load paper onto the rear tractor before you install the
perforation cutter. See “Loading Paper onto the Rear Tractor” in
Chapter 3.
1. Turn off the printer and open the paper separator cover.
p-2
5-20-a2
6
R
Peony
Rev.C
A5 size
Chapter 6
98/01/07
Pass 4
Using Printer Options
6-13
Summary of Contents for C204001 - DFX 8500 B/W Dot-matrix Printer
