Epson C11CG31201 User Manual Download Page 294 | Manualshive

Page: 294 / 305

background image

294

• Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying,

crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over.
Be careful to keep the cord straight at each end.

• If you use an extension cord with the product, make sure the total ampere rating of the devices

plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total
ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere
rating.

• Always turn off the product using the power button, and wait until the power light stops flashing before

unplugging the product or cutting off power to the electrical outlet.

• If you will not be using the product for a long period, unplug the power cord from the electrical outlet.

• Place the product on a flat, stable surface that extends beyond its base in all directions. It will not

operate properly if it is tilted or at an angle.

• Allow space behind the product for the cables, and space above the product so that you can fully raise

the document cover.

• Leave enough space in front of the product for the paper to be fully ejected.

• Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.

• Do not place or store the product outdoors.

• Do not place the product near excessive heat sources or in direct sunlight.

• Leave enough room around the product for sufficient ventilation. Do not block or cover openings in the

case or insert objects through the slots.

• Keep the product away from potential sources of electromagnetic interference, such as loudspeakers

or the base units of cordless telephones.

• Keep your product at least 8.7 inches (22 cm) away from cardiac pacemakers to prevent your

product's radio waves from affecting the operation of the pacemaker.

• When connecting the product to a computer or other device with a cable, ensure the correct

orientation of the connectors. Each connector has only one correct orientation. Inserting a connector
in the wrong orientation may damage both devices connected by the cable.

• Do not touch the flat white cable inside the product.

• Do not move the print head by hand; this may damage the product.

• Do not spill liquid on the product or use the product with wet hands.

• Do not use aerosol products that contain flammable gases inside or around the product. Doing so may

cause fire.

«
...
292
293
294
295
296
...
»

Summary of Contents for C11CG31201


















































































































































































































































































































Reviews:

No comments

Related manuals for C11CG31201

Panafax UF-7000

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 68

Brand: Panasonic Pages: 120

Brand: Panasonic Pages: 100

KX-MB781 - B/W Laser - All-in-One

Brand: Panasonic Pages: 96

Brand: Panasonic Pages: 130

Brand: Oki Pages: 210

Brand: Panasonic Pages: 77

Brand: Panasonic Pages: 402

Brand: Panasonic Pages: 54

Workio DP-8016P

Brand: Panasonic Pages: 88

Brand: Panasonic Pages: 60

Brand: Valentin Pages: 96

Pixma TS7700i Series

Brand: Canon Pages: 554

Brand: Oki Pages: 98

Brand: Xerox Pages: 24

Brand: Maxim Pages: 69

Brand: AGFA Pages: 266

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands