Disassembly and
Service
3.2.4.8 Pick-up Roller Assembly Removal
1. Open the front cover.
2. Remove the
(Refer to Section
3 Remove the
Securing
and remove the
4. Remove both sides of the KL clips securing the pick-up roller, and remove both sides of the
bearings.
5. Remove the pick-up roller.
I
Figure 3-31. Removing the Pick-up Roller Assembly
3.2.4.9 Pick-up Solenoid Removal
1. Remove
(Refer to Section 3.2.1.2.)
2. Remove
(Refer to Section
3 Remove the
(Refer to Section 3.2.4.4.)
4. Remove thetrans. chute assembly. (Refer to Section 3.2.4.7.)
5. Remove
(Refer to Section
6. Remove 5
screws
x 8) securing the front frame assembly to
front rover.
7.
Remove thepick-up roller assembly. (Refer to Section 3.2.4.8.)
8. Remove 1
screw
x 8) securing the pick-up solenoid, and remove it.
9. Disconnect
from the
pick-up solenoid.
Figure 3-32. Removing the Pick-up Solenoid
3-20
Rev.
