Epson C11C560111 - PLQ 20 B/W Dot-matrix Printer, User Manual

Page: 50 / 114

40
Changing your Printer’s Settings
To access and change a setting, see “Changing default settings”
on page 53.
Default-setting mode
Common Settings
Menu Values (default in bold)
Software PR2 , ESC/P2, IBM PPDS
High speed draft Off , On
I/F mode * Auto , Parallel, Serial, USB
Auto I/F wait time (Seconds) 10 , 30
Parallel I/F bidirectional mode Off, On
Packet mode ** Auto , Off
Baud rate (bps) 19200, 9600 , 4800, 2400, 1200, 600, 300
Data length (bit) 8 , 7
Parity None , Odd, Even
DSR (PR2) Off , On
DCD (PR2) Off , On
Passbook Off, On
Binding Horizontal , Vertical
Thin paper Off , On
Buzzer Off, On
Paper width measurement After loading , Before printing
Right paper edge detection Off, On
Low-noise mode Off , On
Broken pin compensation Off , On
Broken pin number 1 , 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24