Epson C11C560111 - PLQ 20 B/W Dot-matrix Printer, User Manual

Page: 73 / 114

7
Problem Solver
63
7
7
7
7
7
7
7
7
7
7
7
ESC/P and IBM PPDS modes
O
= on,
F
= flashing
•••
= short series of beeps (three beeps),
•••••
= long series of beeps (five
beeps)
State of panel
lights Beep
pattern Problem
Solution
O
Power
F
Ready
O
Offline
•••
There is no paper loaded in the slot.
Load a paper into the front slot.
•••
Paper is not loaded correctly.
Remove the paper and reload it correctly. See
“Loading Passbooks” on page 17, or “Loading
Single Sheets” on page 19.
•••
Paper is not fully ejected.
Press the F1/Eject button to eject paper.
•••
Paper is jammed in the printer.
To clear the paper jam, see“Clearing Paper
Jams” on page 74.
O
Power
O
Offline
•••
The printer cover is open.
Stop the operation and close the printer cover.
O
Power
F
Offline
— The print head is overheated.
Wait for a few minutes; the printer resumes
printing automatically once the print head
cools.
O
Pause
F
Ready
F
F1/Eject
F
Offline
F
F2
•••••
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.