Epson C11C560111 - PLQ 20 B/W Dot-matrix Printer, User Manual

Page: 79 / 114

7
Problem Solver
69
7
7
7
7
7
7
7
7
7
7
7
The printer does not print when the computer sends data.
Cause What to do
The printer is paused. Press the Offline button to turn off the
Power light.
The interface cable is not
plugged in securely. Check that both ends of the cable
between the printer and the computer
are plugged in securely. If the cable is
connected correctly, run a self-test as
described in “Printing a Self-Test” on
page 55.
Your interface cable does not
meet the printer and/or
computer specifications. Use an interface cable that meets the
requirements of both the printer and
computer. See “Electronic” on page 84
and your computer documentation.
Your software is not properly
set up for your printer. Select your printer from the Windows
desktop or in your application. If
necessary, install or reinstall the printer
driver software. For details, see
Reference
Guide that is included on the User
CD-ROM.
The printer makes noise, but nothing prints or printing stops
abruptly.
Cause What to do
The ribbon has too much slack,
the ribbon has come loose, or
the ribbon cartridge is not
installed properly. Remove any slack in the ribbon by
turning the ribbon-tightening knob, or
reinstall the ribbon cartridge as
described in the section under
“Replacing the ribbon cartridge” on
page 25.