Epson B107011F - GT 10000, User Manual

Page: 94 / 133

88
Solving Problems
The scanner software doesn’t
work properly
■
Make sure the system
requirements (for example, the
operating system version) are
correct for your software. See
page 116.
■
Check your computer’s
memory. If you’re running
other software at the same time,
using RAM resident programs,
or have many device drivers, the
computer may not have enough
memory. (See your software and
computer manuals.) If you’re
scanning a large image or
scanning at a high resolution,
your computer may not have
enough memory to process the
image.
■
Check your software
installation. Make sure that
your software is correctly
installed and set up. If all else
fails, uninstall your software,
then reinstall it. See the
instructions for uninstalling
software on page 93.
You can’t select the automatic
document feeder as your
Document Source
■
Make sure the ADF is installed
properly (see page 36). If
necessary, reinstall it, then
restart your computer.
■
Make sure your scanner is
turned on. Restart your
computer after you turn it on.
shallot.book Page 88 Thursday, January 27, 2000 9:59 PM