REV.-A
GENERAL DESCRIPTION
Table 1-5. Envelope Specifications
Size
Quality
Thickness
Number 6: 6.64 x 3.68 inches (166 x 92 mm)
Number 10: 9.6 x 4.16 inches (240 x 104 mm)
Bond paper, xerographic paper, airmail
0.0063 to 0.0197 inch (0.16 to 0.52 mm)
(Within the printing area, the thickness differential must not exceed 0.0098 inch [0.25
mm]).)
12 to 24 pounds (45 g/m
2
to 91 g/m
2
)
NOTES:
1. Printing on envelopes can be performed only when the temperature is normal.
2. Envelopes should be positioned horizontally.
3. For Number 6 envelopes, set the left side so that it matches the setting mark on the sheet guide.
Sire
Thickness
Table 1-6. Label Specifications
Greater than 2½ x 15/16 inches (63.5 x 23.8 mm)
0.0063 to 0.0075 inch (0.16 to 0.19 mm)
*Thickness of the base paper must be 0.0028 to 0.0031 inch (0.07 to 0.09 mm)
NOTES:
1. Printing on labels is available only at normal temperatures.
2. Labels must be fanfold.
3. For printing on labels with pressure sensitive paper, the following conditions must be met:
(1)
sheets of labels must be joined at the perforation or tractor holes.
(2) the total thickness may not be greater than 0.0118 inch (0.3 mm)
(3) the temperature must be b 41 °F and + 95 °F (+ 5° and + 35°C), and relative humidity
between 10% and 80%
4. Examples of acceptable labels:
Avery Continuous-Form Labels
Avery Mini-Line Labels
5. Do not perform reverse feed.
more than 2 1/2 "
R : more than 2.5 mm
Figure 1-3. Label Dimensions
LQ-510
1-5
Summary of Contents for AP-4000
