Epson AL-M7100 Series, User Manual

Page: 63 / 98

Replace Feed Roller C1, Replace Feed Roller C2,
Replace Feed Roller C3, Replace Feed Roller C4,
Replace Feed Roller C5 (AL-M8200/AL-M8100 Series
only)
The indicated feed roller has reached the end of its
service life and needs to be replaced. Press the
OK
button to clear this error.
Replace Maintenance Unit (AL-M8200/AL-M8100
Series only)
The maintenance unit has reached the end of its service
life and needs to be replaced. Press the
OK button to
clear this error.
Replace Toner Cart and Waste Toner Box
The toner cartridge and the waste toner box have
reached the end of their service lives and need to be
replaced.
For details about replacement, see the instructions that
come with the toner cartridge.
Replace Waste Toner Box
The waste toner box has reached the end of its service life
and needs to be replaced. For details about replacement,
see the instructions that come with the toner cartridge.
Reserve Job Canceled
The printer cannot store the data of your print job using
the Reserve Job function. The maximum number of
print jobs stored on the printer’s memory has been
reached, or the memory has no more memory available
to store a new job. To store a new print job, delete a
previously stored job. Also, if you have any Confidential
Job stored, printing those jobs will make more memory
available.
You may also increase the available memory space by
changing the
RAM Disk setting to Normal or Maximum .
For details, see “Setup Menu” on page 17 .
To clear this warning message, select Clear Warning
from the control panel’s Reset Menu .
Reset All
All printer’s interface has been reset and the buffer has
been cleared. The printer reboots automatically.
Reset to Save
A control panel menu setting was changed while the
printer was printing. Press the
OK button to clear this
message. The setting will become effective after printing
has finished.
Alternatively you can clear this message by performing
Reset All on the control panel. However, the print
data will be deleted.
ROM CHECK
The printer is checking the ROM.
SELF TEST
The printer is currently performing a self test and
initialization.
Service Req Cffff/ Service Req Exxx
A controller error or a print engine error has been
detected. Turn off the printer. Wait at least a few
seconds, then turn it back on. If the error message still
appears, write down the error number listed on the LCD
panel (
Cffff
/
Exxx
), turn off the printer, unplug the
power cord, then contact a qualified service
representative.
Set Paper tttt pppp
The paper loaded in the specified paper source (
tttt
)
does not match the required paper type ( pppp ). Replace
the loaded paper with the correct paper type and press
the
OK
button to resume printing, or cancel the print
job. To cancel the print job, see “Cancelling a Print Job”
on page 55 .
If you press the OK button without replacing the paper,
the printer will print on the loaded paper even though it
does not match the required paper type.
Set Paper tttt sssss
The paper loaded in the specified paper source (
tttt
)
does not match the required paper size (
sssss
). Replace
the loaded paper with the correct size paper and press
the
OK button to resume printing, or cancel the print
job. To cancel the print job, see “Cancelling a Print Job”
on page 55 .
If you press the OK button without replacing the paper,
the printer will print on the loaded paper even though it
does not match the required size.
Set Paper tttt ssss1 or ssss2
AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Troubleshooting
63