Epson AL-M7100 Series User Manual Download Page 19

Page: 19 / 98

Item

Explanation

Page Protect

Allocates additional printer memory for printing data, as opposed to receiving it. You may
need to turn this setting on if you are printing a very complex page. If a

Print Overrun

error message appears on the LCD panel during printing, turn this setting on and reprint
your data. This reduces the amount of memory reserved for processing data so your
computer may take longer to send the print job, but it will allow you to print complex jobs.

Page Protect

usually works best when

Auto

is selected.

Note:

❏

Changing the

Page Protect

setting reconfigures the printer’s memory, which

causes any downloaded fonts to be deleted.

❏

This function is available only for ESCP2, FX, or I239X mode.

Settings (default in bold):

Auto

, On

A4/LT Auto Switching

LT->A4

(or

A4->LT

) is selected, if letter (or A4) size paper is selected for printing but there

is no paper source set to letter (or A4), the printout is output on A4 (or Letter).

A4<->LT

is selected, if A4 or letter size paper is selected for printing but there is no paper

source set to the selected paper size, the printout is output on the alternate paper size. (A4
for letter or letter for A4)

Settings (default in bold):

LT->A4

, A4->LT, A4<->LT, Off

LCD Contrast

Adjusts the contrast of the LCD panel. Use the

and

Down

buttons to set the

contrast between

(lowest contrast) and

(highest contrast).

Settings (default in bold):

0 ...

... 15

LCD Backlight

Auto

is selected, the LCD backlight lights. Also, it turns off during Sleep or Deep Sleep

mode. If

Off

is selected, the LCD backlight is always off.

Settings (default in bold):

Auto

, Off

RAM Disk

Specifies the RAM disk size available for the Reserve Job function.

After this item is changed, the setting value takes effect after a warm boot or after the
power is turned on again.

Settings (default in bold):

Off

, Normal, Maximum

Convert to Simplex

In the duplex printing mode, specifies whether to print the last page of a job in one side
printing mode. Setting

Odd Page

1 Page

can prevent the last page from being printed

on an unexpected page when you are printing on preprinted paper or hole-punched
paper.

❏

Odd Page

: 1-page jobs or the last page of a job with an odd number of pages are

printed in one side printing mode.

❏

1 Page

: 1-page jobs are printed in one side printing mode.

❏

Off

: The last page of all jobs (including 1-page jobs or jobs with an odd number of

pages) is printed in duplex printing mode.

AL-M8200/AL-M8100/AL-M7100 Series User's Guide

Getting to Know Your Printer

Summary of Contents for AL-M7100 Series



































































































Search results

Summary of Contents for AL-M7100 Series

Reviews:

Related manuals for AL-M7100 Series

Brands by name

Popular brands

Epson AL-M7100 Series, User Manual

Search results

Summary of Contents for AL-M7100 Series

Reviews:

Related manuals for AL-M7100 Series

Brands by name

Popular brands