❏
Prefix all commands with “#”, and specify the #Password command at the top of the e-mail.
❏
Command lines without “#” are ignored.
❏
Write one command on each line and separate each command and parameter with a space or a
tab.
When the same command is written two or more times in one e-mail, the second and subsequent
commands are ignored.
Command
Parameter
Description
#Password
Password
Use this command at the top of the e-mail when a password
for read only is set. You can omit this command when the
password is not set.
#NetworkInfo
—
Set this when you want to check information on the network
settings list.
#Status
—
Set this when you want to check the printer status.
Example of Commands
❏
When the read only password is “ronly”, and to check the printer status:
#Password ronly
#Status
#NetworkInfo
Conserving Supplies
You can change several settings in your print driver to conserve toner cartridge and paper.
The following descriptions use the PCL 6 driver as an example.
Supply
Setting
Function
Toner cartridge
Draft Mode
in the
Advanced Settings
tab
This check box allows the users to select a print mode that uses
less toner. The image quality will be lower when this feature is
used.
Epson AcuLaser CX29 Series User’s Guide
Maintenance
425