2. Select
Report/List
, and then press the
button.
3. Select
System Settings
, and then press the
button.
The System Settings page is printed.
4. Find the IP address under
Network (Wired)
on the System Settings page.
If the IP address is
0.0.0.0
, wait for a few minutes to resolve the IP address automatically, and then
print the System Settings page again.
If the IP address is not resolved automatically, see “Assigning an IP Address (for IPv4 Mode)” on
page 62.
Disabling the Firewall Before Installing Your Printer
Note:
For Windows XP, Service Pack 2 or 3 must be installed.
If you are running one of the following operating systems, you must disable the firewall before
installing the Epson printer software:
❏
Windows 7
❏
Windows Vista
❏
Windows Server 2008 R2
❏
Windows Server 2008
❏
Windows XP
The following procedure uses Windows XP as an example.
1. Click
start
—
Help and Support
.
Note:
For Windows Vista, Windows Server 2008, Windows Server 2008 R2 and Windows 7 operating
systems, if you use
Online Help
, switch to
Offline Help
on
Windows Help and Support
window.
2. In the
Search
box, enter
firewall
and then press the
Enter
key.
In the list, click
Turn Windows Firewall on or off
and then follow the instructions on the screen.
Epson AcuLaser CX29 Series User’s Guide
Network Basics
66