Selecting password types
You can define both User and Supervisor password levels for
this system. If this system will be used by more than one
person, you may want to set a Supervisor password for
yourself and a User password for others you don’t want to
have complete access to the system. This allows you to restrict
access to the computer’s diskette drives or the virus protection
features.
See the next sections for instructions on selecting the type of
password prompting you want, and on entering, changing, or
deleting passwords.
N o t e
If both a Supervisor password and a User password are
enabled, SETUP displays options for setting the User
password only to users who logged on with a User
p a s s w o r d .
Selecting pass word prompting
If you enable the
Password on boot
option, you must
enter the Supervisor or User password each time you turn on
the system. If you disable this option, but you’ve defined
passwords, you must enter the password each time you start
SETUP.
Entering or changing passwords
To specify a User password, you must first specify a Supervisor
password. Follow these steps to enter or change a password:
1. Select
Set Supervisor Password
and press
Enter.
2.
You see a Set Supervisor Password window. Type a
password of up to seven characters and press
Enter.
2-14
Running SETUP Installing Drivers
Summary of Contents for ActionTower 8000
Page 1: ......
Page 28: ...1 10 Setting Up Your System ...
Page 71: ...Installing and Removing Options 4 7 ...
Page 167: ...Hardware Interrupts System l O Address Map A 12 Specifications ...
