* Default setting
The
Integrated Peripherals
options are described in
the table below.
Integrated peripherals options
Option
COM 1
COM 2
LPT port
Settings
Description
3F8,
IRQ 4 * (COM1)
Assign the address for the built-in
2F8,
IRQ 3 * (COM2)
primary and secondary serial
338,
IRQ 4
ports: the Auto setting detects
238,
IRQ 3
any optional ports you may have
3E8, IRQ 4
installed and sets the built-in ports
2E8, IRQ 3
automatically based on the
2E8, IRQ 4
optional port settings to avoid
2E0, IRQ 3
conflicts (if no optional ports are
220,
IRQ 4
installed, Auto sets the built-in
228,
IRQ 3
ports to their default settings): the
Auto
Disabled setting disables the
Disabled
port(s)
378,
IRQ 7 *
Assigns the address for the built-in
278,
IRQ 7
parallel port: the Auto setting
3BC, IRQ 5
detects any optional ports you
378,
IRQ 5
may have installed and sets the
278,
IRQ 5
built-in port automatically based
3BC, IRQ7
on the optional port settings to
Auto
avoid conflicts (if no optional
Disabled
ports are installed, Auto sets the
built-in port to the default setting):
select
Disabled
to disable the
port
LPT Mode
Standard
Bi-Directional*
ECP
Sets the parallel port mode to:
Unidirectional AT mode
Bidirectional
PS/2 mode
Extended Capabilities Port
mode
Diskette
controller
CMD
Enhance
Mode 3
Enabled *
Disabled
Enabled *
Disabled
Enables or disables the built-in
diskette drive controller
Enables or disables the CMD
driver that automatically checks
your drive’s IDE modes
Running SETUP and Installing Drivers
2-9
Summary of Contents for ActionTower 8000
Page 1: ......
Page 28: ...1 10 Setting Up Your System ...
Page 71: ...Installing and Removing Options 4 7 ...
Page 167: ...Hardware Interrupts System l O Address Map A 12 Specifications ...