Printing on Single Sheets
You can load standard-sized single sheets with the paper
cassette and you can load single sheets of paper from 148
mm
(5.8
inches) to 257 mm (10.1 inches) wide with the manual
insertion slot.
Tips for
using the paper cassette
To review the steps for loading paper in the paper cassette, see
“Loading paper into the paper cassette” on page 1-12. The tips
below help you get the best performance when printing with
the cassette.
Load paper in the paper cassette before you turn on the
printer. When the printer receives the data from the
computer, it loads a single sheet automatically and begins
to print
If the printer runs out of paper during a print job, reload
the paper cassette and press the
FF
button to load the paper.
Press the
FF
button to eject a sheet of loaded paper.
You can adjust the top-of-form position with the gear
under the printer cover. It is marked by + and - signs.
Open the printer cover and turn the gear to adjust the
position The notches on the ribbon mask indicate the base
line of printed characters. The gear adjustment affects only
the loaded page. If you want to change the top-of-form
position permanently, you can adjust it in the
default-setting mode described in Chapter 3. However,
most application software programs take care of the top
and bottom margins. You usually don’t need to set the
top-of-form position on the printer.
Summary of Contents for ActionPrinter 3260 s
Page 1: ......
