Roll Paper Holder
The optional roll paper holder (# 8310) allows you to use your
printer with 8.5-inch roll paper like that used
with
telex machines.
This provides an inexpensive alternative to continuous paper.
Installing the roll paper holder
1. Turn off the printer and remove the paper guide.
2.
Position the roll paper holder beneath the printer as shown
below. Fit the two holes in the base onto the two positioning
pegs on the bottom of the printer.
3. Push the paper-release lever to the single-sheet position
CAUTION:
Only the weight of the printer holds the roll
paper holder in place. The positioning pegs only prevent
the holder from slipping out of position. If you pick up
the
printer, be careful to avoid dropping the roll paper
holder.
4-14
Using the Printer Options
