4. If the computer remains locked up after you’ve waited
a reasonable amount of time, reset it by pressing
5. If resetting does not work, you probably need to turn off the
computer, wait five seconds, and turn it back on.
Password Problems
If you set a password using the Setup program, you must enter
it at the times you selected in setup: either whenever you start
or reset the computer or whenever you start the Setup
program. If you have trouble using your password, try the
following:
1.
2.
3.
If you type the password and then see an
X
,
type it again
and press
If you type it wron three times, the
computer locks up. Press
to reset
the computer and try again.
If you know the current password but you want to change it,
see Chapter 5 for instructions.
If you have forgotten your password, call the Epson
Connection for assistance.
A-8 Troubleshooting
Summary of Contents for ActionNote 4SLC-25
Page 1: ......
Page 130: ...AT Commund Summary continued FaxModem Command Set B 3 ...
Page 135: ...AT Register Summary B 8 Fax Modem Command Set ...
