Running Tests
Follow these steps to run a test from the Execute menu:
1. Press
or
to select Execute. You see the
Execute menu, such as the following:
System Board
Numeric
Coprocessor
system
Metmory
Diskette Drive
A
Hard Disk Drive #l
Serial Port COMl
Serial Port C0M2
Printer
Port LPTl
Video
Adapter
Test
Keyboard Test
2. Press
or
to highlight the device you want to
test and press
. You see the Repeat prompt:
How
often to repeat test? 1
3. If you want to run the test once, press
. To run the test
more than once, type the number of times and press
.
4. If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK DRIVE(S) AND CONTROLLER
CHECK
MENU
1 -
Seek
check
2 - Write, read check
3 - Read, verify check
4 - Run all above checks
0 - Exit
Running System Diagnostics
6-5
Summary of Contents for ActionNote 4SLC-25
Page 1: ......
Page 130: ...AT Commund Summary continued FaxModem Command Set B 3 ...
Page 135: ...AT Register Summary B 8 Fax Modem Command Set ...
