Epson 836XL - Expression - Flatbed Scanner User Manual Download

Page: 80 / 120

Troubleshooting

Page 80

Scan Quality Problems

The entire image is distorted or blurred.

Part of the image is distorted or blurred.

Problem

Solution

The document is not
placed correctly.

Make sure the document is placed flat on the document table.

You may have accidentally moved the document during scanning.
Check the position of the document and don’t move it while the scanner
is operating.

Be sure the scanner is not tilted or placed on an unstable surface.

Problem

Solution

Part of the document
may be wrinkled,
warped, or not in
contact with the
document table.

Be sure the document is uniformly flat and smooth.

There may be IRQ
(interrupt request)
conflicts within your
system.

Check your operating system manual and online help files for
instructions on how to resolve IRQ conflicts.

Summary of Contents for 836XL - Expression - Flatbed Scanner

























































































































Search results

Summary of Contents for 836XL - Expression - Flatbed Scanner

Reviews:

Related manuals for 836XL - Expression - Flatbed Scanner

Brands by name

Popular brands

Epson 836XL - Expression - Flatbed Scanner, User Manual

Search results

Summary of Contents for 836XL - Expression - Flatbed Scanner

Reviews:

Related manuals for 836XL - Expression - Flatbed Scanner

Brands by name

Popular brands