Maintaining and Transporting Your Scanner
Page 70
Cleaning the Scanner
To keep your scanner operating at its best, you should clean it
periodically. Before cleaning it, unplug the scanner’s power
cable. Then clean the outside with mild detergent diluted in
water.
If the glass of the document table gets dirty, clean it with a soft
dry, lint-free cloth. If grease or other hard-to-remove material
gets on the glass, remove it with a small amount of glass
cleaner on a soft lint-free cloth. Wipe off any remaining
moisture with a dry lint-free cloth.
Do not:
◗
Scratch or damage the document table glass
◗
Use a hard or abrasive brush to clean it
◗
Use alcohol, thinner, or corrosive solvents
◗
Spill liquids into the scanner mechanism or electronic
components
◗
Spray lubricants inside the scanner
Caution:
Never open the
scanner case.
