Epson 2000P - Stylus Photo Color Inkjet Printer, Service Manual

Page: 104 / 178

EPSON Stylus PHOTO 2000P Revision A
DISASSEMBLY AND ASSEMBLY Disassembly Procedures 104
Figure 4-39. LEVER, HOPPER, RELEASE Installation
Figure 4-40. LD Roller Assembly Installation (1)
C H E C K
P O I N T
„
While assembling the ASF Unit, be careful not to smear
any parts with oil on the cam parts. If oil gets other
parts, it should be wiped off.
„
When installing LEVER, HOPPER, RELEASE, set it in the
correct direction. (See Figure 4-39.)
„
Be sure to attach the following parts to SHAFT, ROLLER,
LD securely. (See Figure 4-38.)
- BUSHING, FIXING, SHAFT, LEFT (white plastic part)
- WHEEL, DETECTOR (black plastic part)
„
When installing the LD Roller Assemblies to SHAFT,
ROLLER, LD, make sure the black one (right LD Roller
Assembly) goes to the right.
„
When setting the right and left LD Roller Assemblies,
align their grooves with the rail rib in FRAME, ASF; B.
(See Figure 4-40.)
LEVER, HOPPER, RELEASE
Rail Rib in FRAME, ASF; B
Groove in the LD Roller
Assembly