Epson 2000P - Stylus Photo Color Inkjet Printer, Service Manual

Page: 129 / 178

EPSON Stylus PHOTO 2000P Revision A
ADJUSTMENT Adjustment 129
5. As in the example, the adjustment pattern prints in black and
magenta. If the result is not correct as shown in the example in Figure
5-14, select
Move the carriage to the adjustment position, and the
carriage automatically moves to the left end to let you move the
adjust lever easily. Then, moving the lever as instructed in Figure
5-14, adjust the printhead angle.
Figure 5-14. Use of the Adjust Lever
6. After moving the lever, select Move the carriage to the home position
and click OK . The carriage unit returns to the home position.
7. Select Print the head angular adjustment pattern and click
OK
to print
another test pattern.
8. Repeat the steps 5 - 7 until the result is good.
9. When the adjustment is done, fasten the screws.
10. Run the adjustment pattern again for confirmation. If the result is not
satisfactory, start over the adjustment.
11. If you need to continue to the next adjustment, return to the Head
angular adjsutment window and select it from the menu. To exit the
program, press the Esc button.
Adjust Lever
Move the lever
forward.
Move the lever
backward.
Correct condition
C A U T I O N
„
Adjustment pattern does not print unless the carriage is in
the home position.
„
During the adjustment, be careful not to leave the carriage
unit out of the home position too long.
„
The setting value stored in EEPROM is not effective until
the printer is next turned on.