Epson 2000P - Stylus Photo Color Inkjet Printer, Service Manual

Page: 134 / 178

EPSON Stylus PHOTO 2000P Revision A
ADJUSTMENT Adjustment 134
5.2.9 Initial ink charge
If the Head cleaning is not powerful enough to solve the dot missing
problem, perform Initial ink charge that consumes more ink.
1. Starts the service program and get to the main menu.
2. Click the Maintenance tab.
3. Select Initial ink charge from the maintenance menu and click
OK
. The
printer begins the initial ink charge operations.
Figure 5-24. Initial Ink Charge Window
5.2.10 Protection counter check
This function enables you to check the current value for the protect
counter A. The protect counter A monitors the level of waste ink flown
into the waste ink absorber. If the wasted ink level passes the limit, it will
finally overflow into the printer. To avoid this, the printer indicates
“Maintenance Request” when the counter reaches the limit, and stop
accepting any data except for the power signal from the control panel.
During repair service, you are required to replace the waste ink absorbers
and reset the protection counter. For the waste ink absorber replacement
procedure, see Chapter 4. Note you can also reset the protection counter
by the panel operation.
5.2.10.1 Check the Present Counter Value
1. Starts the service program and get to the main menu.
2. Click the Maintenance tab.
3. Select Protection counter check from the maintenance menu. The
protection counter check/clear window appears.
Figure 5-25. Protection Counter Check/Clear Window
C A U T I O N
„
The initial ink charge operation consumes the following
amount of ink at a time:
Black ink cartridge: Approximately 1/10
Color ink cartridge: Approximately 1/7
„
Do not perform this function using half-size ink cartridges.
C A U T I O N
„
Protection counter check does not clear “Maintenance
Request” but the resets the protection counter only.
„
To clear “Maintenance Request”, refer to Chapter 1/
Section 1.4.4 or Chapter 3/Section 3.1.1.6.