The SilverFast Defaults screen appears:
3
Make sure Gamma-Gradation is set to 1.80,
then click the CMS tab. The CMS Defaults
screen appears:
4
Make the following settings so that
SilverFast can communicate color correctly
to your host application.
In the Color Management Section, set
Scanner->Internal to ColorSync, set
Internal->Monitor to Automatic, and set
Internal->Output to RGB.
When you see the following warning,
click OK. The next settings you make will
change the SilverFast Internal profile to
Adobe RGB (1998) to match the host
application.
In the Profiles for ColorSync section, set
the Scanner (Reflective) Profile to the
profile you created for reflective scanning
with MonacoEZcolor. For the Internal
profile, choose Adobe RGB (1998).
If you see the warning again, click OK.
You can leave the other settings at their
defaults.
5
When you’ve completed all the settings,
click OK.
24
Summary of Contents for 00000650 - Perfection 3200 PRO Color Scanner
Page 34: ...CPD 16082 Printed in USA ...
