Epson Stylus PRO 7000, Reference Manual

Page: 121 / 182

Maintenance and Transportation
5-13
To set up the printer after transporting it, see “Setting up the
printer after transporting it” on page 5-14. Before you use the
printer after transporting, you may need to perform a nozzle
check and realign the print heads. See your
Startup Guide.
To move the printer using casters
When you want to transport the printer a very short distance, such
as within the same room, you can slide the printer on its casters.
c
Caution:
Do not slide the printer on angled or uneven surfaces.
1. Make sure that the power cord, interface cable, roll paper
spindle, and sheet media are removed, and the roll paper
cover and lower cover are closed.
Note:
If you only need to transport your printer a very short distance using
the casters, you do not need to remove the ink cartridges.
2. Release the front casters and retract the stabilizer knobs.