Epson Stylus PRO 7000, Reference Manual

Page: 103 / 182

Paper Handling
4-19
5. Make the printer driver settings (see “Accessing the Printer
Software” on page 2-2), then send a print job from the
computer. The printer starts printing.
Notes:
Make sure that the Paper Source setting in the printer driver
matches the paper loaded in the printer.
6. When printing is complete, the printer supports the printed
media, and is displayed on the LCD panel. To
remove the paper, hold it while pressing the Paper Feed
button. The paper can be removed from the printer.
Printing on thick paper (0.5 to 1.6 mm)
When you load thick cut sheets, follow the steps below.
Note:
When you use paper other than EPSON special media, or print using
the RIP (Raster Images Processor), refer to the appropriate instructions
or contact your supplier for more information.
1. Set the paper basket forward, if you have installed the
optional Stand. See “When feeding paper forward” on page
4-21.
2. Make sure that the printer is on.
3. Press the
Paper Source
button repeatedly until the Sheet
light comes on.