Edge Power Solutions
EPS-32-V1 / EPS-32-V2 / EPS-16 Installation Manual Revision 7.0 05102020
SECTION 3: Optional Integrated Fiber Optic Splitter
3.1 Optional Integrated Splitter Connection
3.1.1 Source Connection Input:
•
Connect Input from active signal source equipment (GPON Port) using an SC/APC connector
•
Patch other end to signal source equipment or connected fiber patch panel position.
3.1.2 Output Connection:
•
Connect output from positions 1-32 on EPS-RM-1x32-100W-(s) or positions 1-16 on EPS-RM-1x16-100W-(S)
•
Patch other end to servicing device or device servicing fiber patch panel position.
•
On 16 Port Unit, Utilize included 1x2 splitter for 2x16 connection.
END
PAGE 10
WARNING:
Avoid eye exposure to fiber optic openings on this device when connected to external equipment in any
position. A fiber optic splitter is installed in this device. A connection to any position transmits invisible
laser light on all ports that could be damaging to the eye.
