Edge Power Solutions
EPS-32-V1 / EPS-32-V2 / EPS-16 Installation Manual Revision 7.0 05102020
Wall Mount:
EPS wall mount systems may utilize locking plug system for external power connections or internal direct power supply connections
from an RMS equivalent DC power source or properly configured Digital Electricity™ receiver.
Direct Power Supply Connection:
Connection Point #1 in illustration below
o
(-) Negative Lead to Power Supply Neutral Input
o
(+) Positive Lead to Power Supply Line Input
OPTIONAL Digital Electricity™ receiver connection:
Connection Point #2 in illustration below
EPS wall mount PDUs have internal shelves for Digital Electricity™ receiver mounting. Follow Volt Server™ connection procedures.
Volt Server™ connection procedures take precedence over EPS instructions.
•
DC Power out from receiver to PDU power supply connections:
o
(-) Negative Lead to Power Supply Neutral Input
o
(+) Positive Lead to Power Supply Line Input
•
Receiver input connection from source transmitter:
o
Connect pre-connected receiver input to mating input adapter tail via conduit knockout at the top, side, or bottom
of the enclosure.
NOTE: Do NOT disconnect until DC source power has been powered off and discharged.
PAGE 9