manualshive.com logo in svg

ePropulsion Pod Drive 1.0 Evo, User Manual, Page: 5 / 48

Share
Download
ePropulsion Pod Drive 1.0 Evo User Manual Download Page 5

3

Table of Contents

Acknowledgement ..................................................................................... 1
Using This Manual ..................................................................................... 1
Symbols .................................................................................................... 1
Product Identification ................................................................................ 2
1 Product Overview ................................................................................... 5

1.1 In the Package  ........................................................................................ 5
1.2 Parts and Diagrams ................................................................................. 8
1.3 Technical Data ....................................................................................... 10
1.4 Declaration of Conformity ..................................................................... 11
1.5 Important Notes  ................................................................................... 12

2 Checking the Propeller ......................................................................... 13
3 Mounting the Motor .............................................................................. 15
4 Connecting the Battery ......................................................................... 19

4.1 Connecting a 48V Battery ..................................................................... 19
4.2 Connecting a SPIRIT Battery Plus (Only for Pod Drive 1.0 Evo) ......... 20

5 Evo Remote Control .............................................................................. 21

5.1 Display Panel ......................................................................................... 21
5.2 Charging ................................................................................................. 25

5.2.1 Charging by Solar Power ............................................................. 25
5.2.2 Charging by Wired Connection ................................................... 25

5.3 Power Adjusting .................................................................................... 27

5.3.1 Power Adjusting for Evo Remote Control ................................... 27
5.3.2 Recalibration ................................................................................ 28

5.4 Use of Kill Switch ................................................................................... 29
5.5 Use of Safety Wristband ....................................................................... 30

5.5.1 Pairing safety wristband with remote control ............................ 30
5.5.2 Man overboard protection ........................................................... 30
5.5.3 Emergency stop ........................................................................... 30

5.6 Pairing Remote Control with the Pod Drive ......................................... 31
5.7 Warning Messages ................................................................................ 33

Summary of Contents for Pod Drive 1.0 Evo

















































Reviews:

No comments