ePropulsion Pod Drive 1.0 Evo User Manual Download Page 26

Page: 26 / 48

Icons

Functions

Motor fan fault

Blink:The motor fan has faults. Please con-
tact the dealer to check the fan wiring.

Distance/time
display

Displaying real time travel distance/time. Set
units (MILE, KM (kilometer) and NM (nautical
mile)) in preference setting page.
The time unit is HR (hour).

Travelled dis-
tance/time
or remaining
distance/time

: Remaining distance or time that the pod

system can travel.
Set units (MILE, KM (kilometer) and NM (nauti-
cal mile)) in preference setting page.

: Travelled distance or time.

Throttle Power

Displaying real time input power to the system.
A blinking “RESET” indicating the throttle should
be reset to zero position.

Wireless
connecting
indicator

Displaying the remote control is wireless
connecting with pod drive.

Hydro generati-
on indicator

Shown constantly: the hydro generation
function is open.
Blink: the machine is charging the battery.

Safety wrist-
band connec-
ting display

Shown constantly: the safety is connec-
ting with the remote control successfully.
Blink: there is a safety wristband to dis-
connect.

The number indicates the number of safety
wristbands connected to the remote control.

Summary of Contents for Pod Drive 1.0 Evo
















































Search results

Summary of Contents for Pod Drive 1.0 Evo

Reviews:

ePropulsion Pod Drive 1.0 Evo, User Manual, Page: 26 / 48

Search results

Summary of Contents for Pod Drive 1.0 Evo

Reviews: