27
4.2.2 Controlling the Motor
a. Starting/Stopping LAGOON Motor
Operations
Description
Start the motor
Make sure the throttle is at zero position.
Short press the on/off button on LAGOON Remote
Control to switch on. Then slide the throttle to start.
Stop the motor
Normal stop:
Push the throttle back to zero position to gradually stop
the motor.
Emergency stop:
Short press the on/off button on LAGOON Remote
Control to stop the motor at once.
Make sure the throttle is at zero position before starting or re-starting
the motor.
If LAGOON Remote Control falls into water by accident, the system will
stop at once to protect.
b. Controlling Speed
LAGOON Remote Control supports stepless forward speed control. After
the motor is started, push the throttle slowly forward to speed up. For SUPs/
kayaks, etc. without a steering system, users can use a paddle to steer.
Ste
ple
ss
spe
ed
up
Zero
Position
Figure 4-5
Reset the throttle back to zero position before restarting the system.
